Distinctive Makes

Pedestals for the Lutron Aurora Smart Bulb Dimmer Switch

Please select the number of slots corresponding to the number of electronic smart home remotes you have. (The electronic remotes are not included.) You can select the color next.

Every pedestal on this page is made for the Lutron Aurora Smart Bulb Dimmer Switch, the round dial Lutron makes for Philips Hue bulbs. Lutron designed it to clamp over a wall toggle; a pedestal turns it into a dimmer for the coffee table or the nightstand, wherever the lamp actually is.

The Aurora's base is screwed to the pedestal, so it stays put while you turn and press the dial. There is no magnet. The mount sits on an angle, the same one my Pico and Hue pedestals use, so a row of mixed remotes lines up.

The single is 54 mm (2.1 in) across and each further slot adds 44 mm, so the double is 98 mm (3.9 in), the triple 142 mm (5.6 in), the quadruple 186 mm (7.3 in) and the quintuple 230 mm (9.1 in). All of them are 89 mm (3.5 in) deep and 28 mm (1.1 in) tall, not counting the dial. The 2+2 and 3+3 put two rows on one base, 168 mm (6.6 in) front to back, for a surface with depth to spare and little width.

More than 20 colors. Each filament has either a matte or a normal finish, so the finish comes with the color. Speckled Black is a graphite base with shiny white specks in it, and Cookies & Cream a cool-white base with black specks.

I also build combination pedestals that hold two kinds of remote on one base, so an Aurora can sit beside a Pico or a Hue dimmer. If you do not see the size, mix or color you want, drop me a line - most of what the shop makes started as a request.

Questions

Will it tip over when I press the button?

No. A support at the back of the pedestal takes the push when you press straight on, and silicone feet keep it from sliding. It stays put because of its shape, not its weight.

How much does it weigh?

About 18 g for the single, up to about 96 g for the 3+3 Sextuple. It is light on purpose: the shape keeps it upright, so it needs no added weight.

Is it 3D printed?

Yes. I design each pedestal and 3D print it to order in PLA, in North Carolina. I choose the filaments and printers myself, and tune the printing for the cleanest finish I can get.

Will the color match my remote?

Not exactly. The plastics remote makers use reflect light differently from the filaments I print with, so even a close color looks a little different side by side. The rendering and the color chip are references, not a guarantee.

Are the remotes included?

No, only the pedestal. It holds the Lutron Aurora Smart Bulb Dimmer Switch. The remotes in the pictures are not included.