Distinctive Makes

Pedestals for the Wemo Stage Scene Controller

Please select the number of slots corresponding to the number of electronic smart home remotes you have. (The electronic remotes are not included.) You can select the color next.

Every pedestal on this page is made for the Wemo Stage Scene Controller, the three-button remote Wemo made for running scenes. It came with a plate for the wall; a pedestal puts it on the coffee table or the nightstand instead, where you are when you want to change the room.

The remote sits on an angle, the same one my Pico and Hue pedestals use, so the buttons face you and a row of mixed remotes lines up. It sits the way it does on the wall: the one-dot button furthest from you, the three-dot button nearest, and the Wemo logo below it.

The single is 50 mm (2.0 in) across and each further slot adds 40 mm, so the double is 90 mm (3.5 in), the triple 130 mm (5.1 in), the quadruple 170 mm (6.7 in) and the quintuple 210 mm (8.3 in). All of them are 89 mm (3.5 in) deep and 38 mm (1.5 in) tall, not counting the remote. The 3+3 puts two rows of three on one base, 168 mm (6.6 in) front to back, for a surface with depth to spare and little width.

More than 20 colors. Each filament has either a matte or a normal finish, so the finish comes with the color. Speckled Black is a graphite base with shiny white specks in it, and Cookies & Cream a cool-white base with black specks.

I also build combination pedestals that hold two kinds of remote on one base, so a Wemo Stage can sit beside a Pico or a Hue dimmer. If you do not see the size, mix or color you want, drop me a line - most of what the shop makes started as a request.

Questions

Will it tip over when I press the button?

No. A support at the back of the pedestal takes the push when you press straight on, and silicone feet keep it from sliding. It stays put because of its shape, not its weight.

How much does it weigh?

About 23 g for the single, up to about 124 g for the 3+3 Sextuple. It is light on purpose: the shape keeps it upright, so it needs no added weight.

Is it 3D printed?

Yes. I design each pedestal and 3D print it to order in PLA, in North Carolina. I choose the filaments and printers myself, and tune the printing for the cleanest finish I can get.

Will the color match my remote?

Not exactly. The plastics remote makers use reflect light differently from the filaments I print with, so even a close color looks a little different side by side. The rendering and the color chip are references, not a guarantee.

Are the remotes included?

No, only the pedestal. It holds the Wemo Stage Scene Controller. The remotes in the pictures are not included.