White 3+3 Sextuple Pedestal for Amazon Basics Dimmer Remotes
Coupon applied
Most orders shipped the next business day!
Colors are an approximation. Screens and filament batches vary; the rendering and the chip are references, not a guarantee. Remotes shown are not included.
Six dimmers in a straight row would take 280 mm of shelf, so this size folds the row instead: two rows of three, 145 mm (5.7 in) across - no wider than the triple - and 201.8 mm (7.9 in) front to back, with the rows level rather than tiered. Put the rooms you set once and leave in the back row, and whatever gets reached for every evening in the front.
The magnet is in the dimmer, not the pedestal - the pedestal carries the steel slug that magnet grips. Each dimmer sets down at an angle you can read and press without picking it up, and lifts off with one hand when a battery is due. Non-slip silicone feet keep the pedestal put on glass, wood or stone, and it is shaped so that pressing the top button does not tip it.
More than 20 colors. Each filament has either a matte or a normal finish, so the finish comes with the color. Speckled Black is a graphite base with shiny white specks in it, and Cookies & Cream a cool-white base with black specks.
The same pedestal is made as a single, double, triple, quadruple and quintuple, all one straight row. I also build combination pedestals that hold two kinds of remote on one base - a Pico beside a Hue, for instance. If you do not see the size, mix or color you want, design your own in the combination builder, or send me a message through Contact at the top of the page - most of what the shop makes started as a request.
Fits the Amazon Basics Smart Wireless Dimmer Switch
Model numbers HCR-Z54C-B-A667-01.
This size holds 6 remotes. 145 × 201.8 × 39.9 mm (5.7 × 7.9 × 1.6 in).
Weight about 156 g.
Finish White is a matte finish.
In the box the pedestal. Remotes are not included.
Proudly designed and manufactured in the USA using 3D printing technology.
Care wipe with a damp cloth. Keep away from direct heat.
No. A support at the back of the pedestal takes the push when you press straight on, and silicone feet keep it from sliding. It stays put because of its shape, not its weight.
About 29 g for the single, up to about 156 g for the 3+3 Sextuple. It is light on purpose: the shape keeps it upright, so it needs no added weight.
Yes. I design each pedestal and 3D print it to order in PLA, in North Carolina. I choose the filaments and printers myself, and tune the printing for the cleanest finish I can get.
Not exactly. The plastics remote makers use reflect light differently from the filaments I print with, so even a close color looks a little different side by side. The rendering and the color chip are references, not a guarantee.
No, only the pedestal. It holds the Amazon Basics Smart Wireless Dimmer Switch. The remotes in the pictures are not included.